Sept 9th, Pat and Lance went “To Sea” it was a great day! Light winds smooth sailing and great time. Of course the Rum and Cokes helped out. One thing that was cool was there were some fighter aircraft practicing around us and it was fun to watch them do fly overs.
We weren’t the fastest boat out there but we held our own., and I am looking forward to having my brave loving wife out again before it gets too cool to be fun.
Wow it could not have been a better weekend, Sat we had great winds in the teens and in the right directions. Jon, Bailey and I went out and within 2 hours were under the bay bridge into the upper bay. The bay was full of sail boats and we saw dock mates running the same track. Only an hour and haft back as Jon keep us right on the edge of the no sail range on a fast close hull run.
Sunday was a big one, the winds were light but my lovely wife and sister in law + husband came out for a sail. My wife Pat has concerns with boats but see went out and that’s a first. At least now she can say she tried it however I think she is a lot less worried that she was before. Stay tuned for updates.
Oh her sister Bernice turns out to really enjoy sailing so we hope to see more of her.
Hmm, someone up above must have said be home, we had an early dinner planned and I thought I could get an early sail in. So off I went and the wind gods must have said “hey Mother’s day”.
Wind in my face going out, calm once out, the 20 knots in my face coming back. Next Mother’s day I stay home.
But still worth the trip!
When I overnight-ed on the boat I tried to turn on the AC to no avail.
The problem turned out to be the AC’s water pump which unlike most pumps does not suck, it just circulates water. The lack of the ability to self-prime its self means that the water lines must be filled with water before it can actually work.
So when I was down last I figured out the correct procedure to get it working after being out of the water. And now we have a cool boat when at dock, the weather just needs to get hotter so we will need it.
Looking at the hatchway boards it is clear they need to be refinished, however there is no way to do it dockside in a day. So I decided to make a Plexiglas cover out of a piece my Dad had given me to make my bachelor dining room table.
A quick trip to Home Depot for a 4×4 section of plywood to use as a pattern and some rough cuts and I went down to slice out the correct section. Then back home to cut it out of plastic and back down to make the fit dead on.
OK, now I have the basic cover, but I want to dress it up a bit with some trim and hasp, I hope to have that done by weekend.
Was working away Thursday when I got a text from Jon saying want to cut out for an afternoon sail, so the answer was yes. Took a couple hours of leave and headed down boat. We went out for an early sunset sail, had nice sail and came back late.
Now my plan was to take Friday off and do some minor work and take a day sail, picked up Alex, local sail boater and we went out for a light wind sail which was nice. Then set about setting up for the night. Tried to get the AC running but could not get the pump working. Things cooled down and I had a nice night in the V-Berth (should have sleep in the main cabin) as there was no reason to squeeze into the V with two nice bunks waiting for me.
Sun came up to fog and a coffee, spent some time checking out the AC pump then off to Sailboat show.
Finished the show, passed up the 300k boats and headed off to the beach.
Saturday on the Bay,
Martha, Minh, Elena and James went out for a short sail out to Thomas Point. As it was the children’s first sail we had a full briefing for them before leaving the dock. Clearly I need to create a before the sail video to help acquaint new sailors to the boat and boat safety rules.
We beat against the wind all the way out past Turkey Island and then we got a nice breeze, a bit cool but nice. From the lighthouse we went south to bring us in to a beam reach coming back in and it was a smooth trip back. With kids and parents on the deck house once we got into Shelly Bay.
Other than some usual kids boredom, and lack of ipad’s to entertain it was a great afternoon. I still need to work more on docking with a breeze as it was a challenge, which we overcame.
We finally got out Saturday, Jon, Bailey and I took to the high sea’s for a quick trip out to Thomas Point lighthouse. We went out fine however it was cool out there and no sun till we came back. All in all we had a good time and it was Bailey’s first time and she was teaching us all water safety from her don’t drown classes.
What a weekend, Pat was off to a silent retreat Friday so went down and started working around 2:30 Friday, cleaning and organizing the boat. Boy that was a job, and I found a few minor things that needed fixing. One of the solar vents was not working so I tore it down and found the fan motor was stuck, however it turns out the whole unit was on sale half off at West so that was easy to solve (fool that I was to think it was that easy).
Saturday was just plain wonderful, mid to upper 70’s so I went back down. Hmm hanging the main was like making a bed with tangled up sheets, it took 3 tries to get it right, but it is up and ready to go now. Got a $30 shop vac at Loews and the boat is now dust free and spotless (except the galley sink). Spotted some paint and staining needed to be done to make her bright and shiny for the season, so I did that on Sunday.
I went by IKEA and got some floating baskets for the galley and the head and hung them, low $’s and high utility.
By the end of the day Friday and Sat I was shot, went home and fell asleep on the couch!
The vent teak trim cover was for 3” and the new unit was 3.250” so that went home to get adjusted. I think the sole (floor of the cabin), needs to be re-varnished as well as the cabin ladder. I will get the varnish and next time I am down as I leave I will lay down a coat.
Wow, Jimmy Cockerill at The Rigging Company is great! He came in was able to identify the problem with furler quickly but was able to create a simple solution to the problem quickly and efficiently (without having to go up the mast!).
Along the way he identified other potential problems, trained me on how to prevent new problems all in an outstanding way. I never felt like he was selling work, he just looked at the problems, addressed them and said down the road you should fix this and that, all for a third of what he had quoted to come down.
I will be going through his company for all the things they do from now on!
Thanks to Ron and the Team at Holiday Point, we got in the water today. Boat is painted and waxed! Tomorrow (3/21) the Rigging Company will come down to go up the mast and start the repair of the Furler.
While the sail repair work is being done we will start cleaning and refitting the boat for leaving the dock. The De-winterizing of the boat will take some time, but it will be fun work.
What can I say, it got COLD big time and that has slowed things down on getting her back in the water. The remaining tasks were the clean and wax of the hull below the toe line.
Once that is done and the boat will go back in water. We need to be in the water for the riggers on the 21st. After that it is fix the furler and De-winterrize motor and plumbing systems. I would be nice to be sail ready by early April but it is looking tight.
The Bottom is painted and the remaining work is polish and wax the sides, De-winterzize and put her back in the water, and fix the furler
Things were going fine and then Jon and I started to put up the Head Sail on the Furler. I must have inserted the sail into the wrong track on the rail because it got hard to pull as it got higher. Using the old brute force trick of the winch we got it up. However then the furler would not rotate.
I suspect we forced the rail up further on the mast head and locked it up.
Being smart and not wanting to go up the mast we took it down and contacted The Rigging Company out of Annapolis and they are coming down on the 21’st to check it out. Lets hope for an easy fix.
Who said this would be an easy entry back into the water…..
Just a week from March, and we are due to be back in water 1st week of March.
The new control panel is cut out and read for components to mount and install back in boat. Pat is out of town from Friday on so I will try and do the install and wiring on Sat/Sun. I will post pictures when done. Also I am pulling the old cabin lights out and putting in new LED ones which will save power.
Ordered bad weather gear today just in case (plus it was on sale at West Marine).
Looking forward to spring,
Today I signed the 2017 lease and work plan to get the bottom painted, the top cleaned and waxed and every thing ship shape for a March 1 launch.
I sure hope the spring comes early but if not I plan to redo the control panel under the hatchway and change the rest of the cabin lights and I can do that with the boat in the water even if the weather is cold (I do have an electric space heater).
Wish me luck
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!
Well it looks like I got it running. People can register themselves and please keep it some what safe for kids to read.
I can not wait to get back in the water, come on March and nice days..