Sailing Around with Dan

The wind was almost dead, but  we wanted to go out and try and see the fireworks so we did!

Coming back in the dark was not barely an easy one, but we had no problems.

Wished the fireworks were bigger.

June 25th, bright sun low 80’s and 9 -12 knots of wind.

We started out with Terry helming us out under power, as we brought up the sails beating into the wind we keep the motor on just for security. At one point a dolphin jumped just off our port side and we all went crazy looking for them. I cut the motor and we looked up to the bow, soon there were maybe one or two of them playing with the bow wake. Before we could get our phones to film them they went off to find bigger boats to play with but it was a good luck omen. The rest of the day we worked our way south tacking across the bay all to put ourselves in position to spinnaker back. All was looking good till I hung the sail wrong, I really need to work on getting the lines right. Bottom line I got the chute all tangled up so we gave up and flew back under Genny and finished a great day.

Laura and I started out for nice sail up the Bay moving along at 4-5 knots became even more fun when radio traffic talked about a boat parade, which we wondered what that was about.

Then as we started getting closer we saw all the Black sails (Kevlar) and the great looking boats with crew on the rail and big number on the sides of the lifelines. The came the big clipper Pride of Baltimore they were all just hanging out then the started going south little by little. We assumed that the day was done and they were heading home, and we joined them to head back, all of them were way faster than we were.

Along the way we heard them calling out to each other with a few saying see you in Bermuda. It did not dawn on us till I checked where the Pride of Baltimore was sailing to and up came the Annapolis to Bermuda race (called the Mustang Survival Race)https://www.bermudaoceanrace.com/

The rest of the sail home was fun until we ran aground for a few mins (the tack was so nice and fast we overshot the channel), after we rounded up Thomas Point heading back in we found a line to sail under spinnaker most of the way back in (in the 5++ knots SOG)!

Early May storm hit the dock hard, we had 30kt sustained winds all weekend May 7&8, from what I was told there were whitecaps in the Marina. Couple of boats broke lines, including Full Sail. Our 1/2″ port bow line snapped! causing the boat to up against the catwalk post. Luckily  John was sleeping on his boat and had his line break also and woke up, after he fixed his he tied a new line on for mine. The damage was just superficial and way above water line but will require repair work (but I will delay till we have time to haul out), but will not our use of the boat.

To prevent any occurrence I got new dock lines and doubled up most of them just to avoid any future problems.

Funny thing is I have been in that slip for 5 years, replacing the lines ever other year and never had a problem. But then we have not had weather like this in years.

After some minor work getting water out of the fuel tank, we are off and running.

Our first sails were with fairly high wind (mid 20’s) and having new sailors aboard we stayed in the river, but boy did we fly!

Found a great spinnaker launch bag at Bacon Sails that should make using the spinnaker easier, and it was brand new and only $20!  https://baconsails.com/

Bunch of minor changes in cabin (still a mess with tools everywhere), but getting organized. Last week re-bedded the front starboard hatch to clear up a leak, added a topping lift, stove top cutting board and more or less just did a bunch of boat projects (wind was very light).

Well we ran it down to the last days, Laura and I were out after Thanksgiving with a great sail on the Bay. We had almost all of the bay to ourselves. Wind was in the teens and we flew out past Thomas Point and then played a bit dancing here and there.

As that day can to an end we thought maybe we would get another, but it turned out to be the last trip out for the year.

Dec 11th we went down to try one one more time but the wind was howling so we just took the day to get her ready to pull, including pulling the sails (which was a interesting event given the wind). All done we went to the Boatyard Grill for a mini wake.

Next year can not come to soon, we will be back in early March!

Sunday on the bay, with lots of wind and waves!

Josh and I headed out with winds looking to be in the mid teens coming out of the west. So we just put out the Genny and soon found ourselves out on the bay in 20-25kts and flying. Full Sail had no problems and often got into the 7’s. Couple hours later found us down below bloody point light. We zigzagged across the bay looking for an easy way back against 30kts in our face and 4′ seas but there was none to be found so we just made do and sailed our way back the hard way.  Josh said it reminded him of sailing on lake Michigan in his youth.

Full Sail, was fine with the sea state and occasionally would spray us just to let us know we were in real water. We took a close hull run and added in the motor to work our way to the western shore coming in below the West River and the letting out a handkerchief size jib sheet we flew @ 5 kts up the line. 

Every once in a while it is good to do something that makes you push yourself, and this was one of those times, and to be honest it built confidence and both myself and the boat. Other than cleaning up things that had not been put away good that ended up on the cabin floor it was outstanding!

Sadly as we approached the South River, our home river, the wind was right in our face so with bare poles we motored back it.

Wow, moving all the lines to the cockpit made sailing so easy!

Heading out, I let Capt. Ron put us into the wind, then using the stack pack zipper pull I open the pack and grab the main line and pull the mainsail up.

If needed I lock the reefing line clutch at on one my reef points and crank till I am set.

I can feed out as much of the jib as I want and lock it down. A quick turn to grab the wind and I am off!

Coming back it’s even easier, as I get close to last turn to the dock, just wind up the jib, pop the main clutch and sails are down and ready to be neatened in the pack and zipping the pack closed ready for the next sail.

Being a lazy sailor (also Safe Sailor), I have always worried about going to the mast to raise, reef or lower the main. Well now I fixed that!

Pat and I installed a deck plate at the base of the mast and then added blocks and a deck organizer to bring the lines back to the cockpit with clutches to make them easy to handle.

I still think I will take one of the wenches off the mast (I have 2), and locate it next to the cockpit clutches. But all in all it so nice and easy to manage the main now, I don’t know why it took me so long to do it..

BTW: When working with 5200 sealant wear gloves, it takes days to wear it off your fingers.

Wow, before this effort we had three unattached networks on the boat:

1. Raymarine Seatalk – A proprietary RS485 based one for theirs systems
2. NMEA 183 – A standard network also serial based
3. The Full Sail Net – An Ethernet/ WIFI system for chart plotter and such 

Now we have tied it all together, it required some new boxes and the use of off the shelf components with new software but now everybody talks to everybody. The AIS radio talks to chart plotter, the Wind gauge talks to the auto pilot, the VHF knows where it is sitting at any given time and reports our location to Coast Guard and everything is reachable via mobile devices (phones, old Ipad etc.).

I am passing data around using a broker (KPLEX) and collecting it from the various components via USB based serial interfaces which can support RS485 and RS422 which is then posted to the broker and is available via TCP connections. Lots of fun. Who said embedded systems can not be made to jump, and proprietary networks can not be hacked and decoded, not me.

So last week we went out for a day sail (8/17) and the only wind we found was the result of the motor pushing us along. It was a nice day with good company but I do miss the winds of the spring.

This weekend looks better, wish us fair winds as we charge off Sunday!

With Maryland sailing released from lock down it has been a great couple of weeks. Also it was a bit of a rushed trip out.

Laura and I went out the Sat. it opened and I had been doing all sorts of project and the cabin was full of tools and such, but we just went out anyway and had a great time.

This Friday, Patricia came down with me a cleaned up the cabin and organized it and Sunday Laura and I went out for a long sail. down to Bloody Point and then tacking up the bay. We went out at 10:30 and got back at 6pm. Laura sailed us all the way with her finger on the remote while we talked.

Wow, today is December 13th (Friday) and Full Sail is heading up to the hard to spend the winter, napping.

This was a great season, we went out almost every weekend, many time with ASA crew joining us from the GoSailing app. We had wind and sometimes not so much. We sailed up the Annapolis to spend the 4th of July week on a ball and watch the fireworks. We added more toys, got an electric outboard to push the dingy around the make easy runs off the boat.

Must say the sails will need some TLC over the winter but all in all she is holding up well. I am looking at putting a set of davits on the back to hold the Dingy and move the solar panels to a better location, that will be the big winter project.

The plan is to go back in the water the first week of March, till then it will be work and couple of weeks in the BVI to keep my sailing addiction feed.

Docks are nice but traveling off them into anchorages or mooring balls requires an easy path to shore (not swimming). So last year on black friday I bought a West Marine PRU-3.

The PRU-3 in a two chamber inflatable that will hold 3 people (900#’s) and will fit in the boat without being tight. It came with a pump to blow it up and a pair of oars. Being the lazy old man I am I went looking for a small outboard and there I learned a lot.

Bottom line I ended up with an electric one (Torqeedo 1103C), which I got from Fawwcett in Annapolis with a small discount. It is light, total weight 38# or 29# without battery, has long run time (6 hrs at 1/2 speed, 20 at slow speed) and is equal to a 3hp gas motor. Not cheap but 2 year warranty and 1st service is at 5 years. No gas, no oil and can charge from either boat’s batteries, solar or dock AC. And waterproof to IP67 standard (it can fall overboard and still work). Even is so smart it will tell you how far you can go (GPS built in). Plus it is a classic case German over engineering!

So all I have to do is put in on dingy (it breaks down to 3 parts to make it light), press the on button and turn the handle and off we go.

BTW: the 12V charger option was $50 but I found the connector in my pile of old wall chargers and a 12V to 24V up-converter on amazon for $13 so I am good for anyplace.